Rohtak District, Haryana
Manufacturing ERP Software for IMT Rohtak
ERP for Rohtak's fastener, turned-part and engineering units — wire and bar stock by heat number, work orders by stage, lot-wise inspection, outside processing and dispatch, with GST, payroll and Tally in one system.
- Coil and heat-number tracing
- Lot-wise QC and rejections
- Multi-plant, GST & payroll
Rohtak
Built for Rohtak's city of fasteners.
Rohtak district has three HSIIDC industrial areas, according to the MSME Development Institute's district profile: the Industrial Development Centre (IDC), the Industrial Estate at Kutana and the Industrial Model Township at Kheri Sadh on the Delhi road, with about 3,680 acres acquired for the IMT. The same profile calls Rohtak a city of fasteners, records a nut, bolt and screw cluster, and lists nuts and bolts, screws, shock absorbers, tools and dies among its exports. The Tribune reported 480 allotted plots at IMT Rohtak as on 30 June 2026, and every plot at Kutana is taken.
That mix shapes what a manufacturing ERP must do here. A fastener unit buys wire rod by the coil but sells by the piece, the box or the kilo. A new plant in the IMT may run beside an older unit in the IDC or Kutana, and many small units work as ancillaries to larger plants. We do not have an office in Rohtak. Our team serves Rohtak manufacturers from our Sector 84 office in Gurgaon, visits your plant for the requirement study and training, and handles day-to-day support over phone and WhatsApp.
Sources: MSME-DI — Brief Industrial Profile of Rohtak District · The Tribune — 874 industrial plots await allotment at IMT-Rohtak · Wikipedia — Rohtak
What a Rohtak plant has to track
- Wire rod and bar arrive by coil, grade and heat number, and each finished lot should trace back to them
- Parts are made in kilos but sold in pieces, boxes and cartons, so the weight-to-count conversion has to be right
- Heading, threading, heat treatment and plating are separate stages, and plating often goes to an outside processor
- Inspection at each stage — dimensions, hardness, thread checks — has to be kept against the lot it belongs to
- One owner may run units in two industrial areas, each with its own stores, staff and billing
Manufacturing ERP
Manufacturing ERP modules in Rohtak.
ERP modules for an IMT Rohtak plant, configured to your parts, stages and buyers.
- Coil and heat-number stockWire rod and bar received by coil, grade and heat number; FIFO issue to production, multi-warehouse stock and reorder alerts for each grade and size.
- Work orders by stageBill of materials per part, work orders through heading, threading, heat treatment and plating, and machine scheduling with output recorded per shift.
- Lot-wise quality controlInspection at each stage entered against the lot, with rejections, rework and wastage counted in both kilos and pieces.
- Outside processingLots sent for plating or heat treatment on job-work challans, received back by weight and count, with the balance held by each processor.
- Packing & dispatchBarcode labels for boxes and cartons, scan-to-dispatch, and GST invoice, e-way bill and e-invoice generated from the same entry.
- Multi-plant, payroll & accountsIMT, IDC and Kutana units in one ERP with plant-wise reports; payroll with PF, ESI and TDS; Tally or Zoho integration for accounts.
Process
How the work runs.
The same clear steps for every Rohtak project, with progress shared on WhatsApp.
- 01Plant walk-throughWe follow one lot from coil to carton and note every stage, check and hand-off.
- 02Item and process mastersGrades, sizes, routings, machines, processors and buyers set up; stock moved from spreadsheets.
- 03First line liveOne product family runs on the ERP first, so shop-floor staff learn on real lots.
- 04All plants on boardRemaining lines and units added; stores, supervisors and accounts trained on-site or online.
- 05Ongoing supportPhone and WhatsApp support from Gurgaon, with new reports and modules as you grow.
FAQs
Manufacturing ERP in Rohtak — FAQs.
Straight answers to what Rohtak business owners ask before they start.
Can the ERP trace a finished lot back to the wire coil?
Yes. Each coil or bar is received with its grade and heat number, and the work order records which coils were issued to it. When a buyer asks about a lot, you can see the raw material, the stages it passed through and the inspection results recorded against it.
We make parts in kilos but sell in pieces. Can the ERP handle both?
Yes. Each item can carry a weight per piece, so stock, production and dispatch can be recorded in kilos, pieces, boxes or cartons, and the ERP converts between them. Your stores register and your invoices then work from the same figures.
Can the ERP plan how much wire rod to buy?
Yes. With a bill of materials per part — wire grade, diameter and weight per thousand pieces — the ERP works out the material needed for open orders, compares it with stock and coils already ordered, and raises reorder alerts by grade and size.
Can supervisors and owners approve things from their phones?
Yes. The mobile ERP app for Android and iOS shows dashboards and reports and handles approvals such as purchase orders and dispatches. A supervisor on the shop floor, or an owner travelling between Rohtak and Delhi, can act without sitting at a desk.
Can rejections be recorded at each stage?
Yes. Quality checks at heading, threading, heat treatment and final inspection are entered against the lot, with the quantity rejected, the reason and whether it goes for rework or scrap. Wastage reports then show where material is being lost, in kilos and in pieces.
We have a unit in the IDC and a new plant in IMT Rohtak. Can one ERP run both?
Yes. Multi-branch control gives each plant its own stock, production and billing, while the owner sees both on one dashboard. Role-based security decides what each plant's staff can see and do, so stores in one unit cannot change another unit's records.
Do you have an office in Rohtak?
No. Our office is in Sector 84, Gurgaon, and our branch is in Kasni, Jhajjar. We serve Rohtak plants from the Gurgaon office, visit your unit for the requirement study and training, and handle day-to-day support over phone and WhatsApp.
Should the ERP run in the cloud or on our own server?
Either works. A cloud ERP can be opened from any plant or phone and has a lower upfront cost. On-premise keeps data on your own server and network. Hybrid keeps core data in-house with selected modules in the cloud. We recommend one after studying your plants.
Rohtak
How we serve Rohtak.
DVM Techno works with Rohtak businesses from its office in Sector 84, Gurgaon and its branch in Kasni, Jhajjar. We do not have an office in Rohtak. Most of the work runs on WhatsApp, phone and video calls with a shared preview link, and we meet in person when a project needs it.
- 01Call or WhatsAppTell us what you need, in Hindi or English.
- 02Plan togetherA video call or meeting to agree the scope, pages and features.
- 03Watch it take shapeProgress on a shared preview link, with changes over WhatsApp.
- 04Launch and supportWe go live, hand over the logins and help with changes after launch.
Areas and landmarks we cover in Rohtak
Industrial and business areas
- D-Park, Model Town
- Subhash Road
Sectors, colonies and villages
- DLF Colony
- Sector 1 / 2 / 3 / 4
- Sector 14
- Sector 21 / 25 / 27
- Omaxe City
- Suncity
- Qila / Killa Mohalla
- Asthal Bohar
Education and healthcare
- Maharshi Dayanand University
- IIM Rohtak
- PGIMS Rohtak
- UIET
- Baba Mastnath University
- State Institute of Film and Television
- A.I. Jat H.M. College
- Civil Hospital Rohtak
Roads, rail and metro
- Rohtak Junction railway station
- NH-9
- NH-352 / NH-709
Specialised solutions
Manufacturing ERP for Your Rohtak Business
Call or WhatsApp +91-8448523313 · Mon–Sat, 9 AM – 7 PM · info@dvmtechno.com