On this page
- Is 100 Mbps better than 50 Mbps?
- How much speed do common activities need?
- Which plan suits your household?
- 50 Mbps vs 100 Mbps for gaming: does it matter?
- What is the difference between Mbps and MBps?
- Upload vs download: which one matters?
- Why is WiFi speed on my phone lower than my plan speed?
- What does no FUP mean?
- How DVM Techno Can Help
- FAQs
Key takeaways
- 50 Mbps covers HD video and online classes on one or two devices; 100 Mbps adds room for a family using several phones, a smart TV and video calls together.
- A single HD or 4K stream needs far less than 50 Mbps; extra speed matters when many devices are busy at once and for large downloads.
- Mbps is megabits per second; divide by 8 to get megabytes per second, so 100 Mbps is at most about 12.5 MB/s.
- A plan with no FUP has no data limit after which speed is cut; an “unlimited” plan with FUP slows down once you cross its limit.
Is 100 Mbps better than 50 Mbps?
50 Mbps is enough for HD video and online classes on one or two devices. 100 Mbps is better when a family runs several phones, a smart TV and video calls at the same time. 200 Mbps suits shops, offices, 4K streaming and many devices at once. For online gaming, a low and steady ping matters more than extra Mbps.
A faster plan does not make one video look sharper. A stream plays at its own bitrate, and once your line can carry that, extra speed sits unused. What 100 or 200 Mbps buys is headroom: room for the TV, two phones, a laptop on a call and a background update to run together in the evening without anyone noticing. It also makes large downloads finish sooner.
Size your plan for the busiest hour of the day, usually the evening when everyone is home, not for an average moment.
How much speed do common activities need?
Most single activities need well under 25 Mbps; the total adds up when several run together. The figures below come from published help pages: a large video platform’s system requirements, a large streaming service’s recommended speeds and a popular video-meeting app’s bandwidth guide. They are per stream or per call.
| Activity | Published recommendation | Source type |
|---|---|---|
| HD 720p video | 2.5 Mbps; 3 Mbps | Video platform; streaming service |
| Full HD 1080p video | 5 Mbps | Video platform and streaming service |
| 4K Ultra HD video | 20 Mbps; 15 Mbps | Video platform; streaming service |
| One-to-one video call, 720p | 1.2 Mbps up and down | Video-meeting app |
| Group video call, 1080p | 3.8 Mbps up, 3.0 Mbps down | Video-meeting app |
| UPI, WhatsApp, web pages, email | Light; no single published figure | General |
Now add up a typical evening. Two TVs playing 4K at 20 Mbps each is 40 Mbps. Add a 1080p class or meeting, a few phones on short videos and an app update, and a 50 Mbps line is close to full. The same mix sits comfortably on 100 Mbps. If only one TV is on and the rest is phones and UPI, 50 Mbps has room to spare.
Which plan suits your household?
Match the plan to the number of people and screens busy at the same time. The table maps common households to the four plans DVM Techno offers on wireless broadband around Kasni, Jhajjar, using the “good for” text from that page. All four plans have unlimited data with no FUP or speed throttling.
| Household | Suggested plan | What the plan page says it is good for |
|---|---|---|
| One or two people, mostly on one device at a time: classes, UPI, WhatsApp, video | Basic, 30 Mbps | One or two users: online classes, UPI and net banking, WhatsApp and video on one device |
| A student or a couple: phones, online classes, UPI, HD video on one or two devices | Starter, 50 Mbps | Online classes and coaching apps, UPI and net banking, WhatsApp Business, HD video on one or two devices |
| A family with several phones, a smart TV and someone working from home | Standard, 100 Mbps | Families with several phones and a smart TV, work-from-home video calls |
| A shop or office, 4K on more than one screen, cameras viewed remotely, many devices | Premium, 200 Mbps | Shops and offices, 4K streaming, remote CCTV viewing, many devices at once |
The plan page notes that 100 Mbps is the most popular choice for families and students. If you plan to watch your CCTV cameras on your phone while away, that live view uses the upload side of the connection at the camera end, so leave room for it.
50 Mbps vs 100 Mbps for gaming: does it matter?
For online multiplayer, the difference is usually small. Games send small packets, so ping (delay), jitter and dropped packets decide how a match feels. Speed matters more for downloading games and updates.
Download time is simple maths. One gigabyte is 8,000 megabits, so under ideal conditions:
- 50 Mbps: about 160 seconds per GB.
- 100 Mbps: about 80 seconds per GB.
- 200 Mbps: about 40 seconds per GB.
Real downloads take longer because of WiFi losses and server limits. To keep ping steady, connect the console or PC by cable where you can, use the 5 GHz WiFi band near the router, and pause big downloads on other devices during a match.
What is the difference between Mbps and MBps?
Mbps means megabits per second and is how plans are sold. MBps (or MB/s) means megabytes per second and is what download managers and app stores often show. One byte is 8 bits, so divide Mbps by 8.
- 50 Mbps is at most about 6.25 MB/s.
- 100 Mbps is at most about 12.5 MB/s.
- 200 Mbps is at most about 25 MB/s.
- If your browser shows a download at 6 MB/s, that is about 48 Mbps.
So a 100 Mbps plan showing “11 MB/s” in a download is working close to its full speed, not at a tenth of it.
Upload vs download: which one matters?
Download is data coming to you: videos, web pages, app updates. Upload is data you send: your camera in a video call, photos to cloud backup, a reel or a large file to a client. Most homes use far more download than upload.
Upload matters when you work from home or teach online. The video-meeting guide above asks for 3.8 Mbps upload for a 1080p group call, more than the 3.0 Mbps it asks for download. It also matters for shops sending camera feeds or files out. When you compare plans from any provider, ask what upload speed comes with each plan, not just the download figure.
Why is WiFi speed on my phone lower than my plan speed?
The plan speed reaches your router; WiFi then loses some of it on the way to each device. A speed test on a phone in another room will almost always read lower than one on a laptop plugged into the router by cable.
- Distance and walls: brick, concrete and floors weaken the signal.
- Band: 2.4 GHz reaches further but is slower and more crowded; 5 GHz is faster at shorter range.
- Older devices: an old phone or laptop with an older WiFi standard cannot reach the full plan speed.
- Sharing: every busy device takes a share of the same connection.
- Overheads: part of every connection carries control data, so tests read slightly below the plan figure even on a cable.
Test on a cable first. If that reads close to the plan, the issue is inside the house. Our guide to the WiFi slow problem and how to increase WiFi range covers router placement, bands and extenders.
What does no FUP mean?
FUP stands for Fair Usage Policy. On a plan with FUP, you get full speed up to a monthly data limit, and after that the speed is cut until the next billing cycle. A plan with no FUP has no such limit, so speed does not drop after a certain amount of data.
In India, the telecom regulator’s January 2016 draft direction on delivering broadband services in a transparent manner asked providers to publish, for every plan offered under a Fair Usage Policy, the data usage limit, the speed up to that limit and the speed beyond it. The draft also proposed that fixed broadband speed should not be reduced below 512 kbps, the minimum in the broadband definition it quotes. It was a consultation draft, so check the regulator’s current rules for the final position.
| Unlimited with FUP | Unlimited, no FUP | |
|---|---|---|
| Data | Unlimited, but full speed only up to a set limit | Unlimited |
| After heavy use | Speed drops to a lower figure until the cycle resets | Speed does not drop because of data used |
| What to check | The limit, and the speed after it | That the plan says no FUP or throttling in writing |
Before you sign up with any provider, ask four questions: Is there a data limit? What speed applies after it? Is speed reduced at certain hours? Is there an extra charge for more data?
How DVM Techno Can Help
DVM Techno provides wireless broadband in 37 villages around Kasni across Salhawas block and Jhajjar tehsil, from its branch office in Kasni. There are four plans, Basic 30 Mbps, Starter 50 Mbps, Standard 100 Mbps and Premium 200 Mbps, all with unlimited data and no FUP or speed throttling. The connection reaches your home over the air, with no cable laying or digging. Installation of the antenna and router is free and usually takes 2 to 3 hours, and in most villages the internet starts the same day after a signal check. See the pages for broadband in Surehti and broadband in Salhawas, and see current prices on the Kasni broadband page, or call or WhatsApp +91-8448523313.
Frequently Asked Questions
Is 100 Mbps better than 50 Mbps?
It is better when many devices are busy at once. One HD or 4K stream needs far less than 50 Mbps, so a single user will see little difference. In a family with several phones, a smart TV and a video call running in the evening, 100 Mbps leaves headroom so nothing buffers, and large downloads finish in about half the time.
Is 50 Mbps enough for gaming?
For online multiplayer, 50 Mbps is usually enough, because games exchange small amounts of data. Ping, jitter and dropped packets matter more than raw speed. Where 100 or 200 Mbps helps is downloading games and updates: at 50 Mbps, each gigabyte takes about 160 seconds under ideal conditions, against about 80 seconds at 100 Mbps.
Is 50 Mbps enough for 4K streaming?
Yes for one or two screens. Published help pages of a large video platform and a large streaming service recommend about 20 Mbps and 15 Mbps for 4K. Two 4K streams at 20 Mbps use about 40 Mbps, so a 50 Mbps plan gets tight if phones, calls and downloads run at the same time. Busier homes are more comfortable on 100 Mbps.
What does no FUP mean in broadband?
No FUP means the plan has no Fair Usage Policy limit. On a plan with FUP, full speed applies only up to a set amount of data each month, then speed is reduced until the cycle resets. On a plan with no FUP, using more data does not lower your speed. Ask the provider to confirm this in writing.
What is the difference between unlimited and unlimited with FUP?
Both let you keep using the internet all month. An unlimited plan with FUP gives full speed only up to a data limit and then slows you to a lower speed. An unlimited plan with no FUP keeps the plan speed regardless of how much data you use. Always check the limit and the speed after it before choosing.
How many MB per second is 100 Mbps?
100 Mbps is at most about 12.5 megabytes per second, because one byte is 8 bits. Plans are sold in megabits per second (Mbps), while download managers often show megabytes per second (MB/s). A download showing 11 MB/s on a 100 Mbps plan is running close to full speed. WiFi losses and server limits can reduce it further.
Are DVM Techno’s broadband plans near Kasni unlimited?
Yes. DVM Techno offers Basic 30 Mbps, Starter 50 Mbps, Standard 100 Mbps and Premium 200 Mbps plans in 37 villages around Kasni, Jhajjar, all with unlimited data and no FUP or speed throttling. Installation of the antenna and router is free. Call or WhatsApp +91-8448523313 with your village name to check coverage; current prices are on the Kasni broadband page.
Related articles
Pick a plan near Kasni
Basic 30 Mbps, Starter 50 Mbps, Standard 100 Mbps and Premium 200 Mbps, all with unlimited data and no FUP or speed throttling, in 37 villages around Kasni.